Printing for shirts and other materials are relatively easy and it does not take that much effort and expense as well. As long as you know what materials to use and how to use them, of course, you can do this all by yourself instead of going into shops. Although you should know what processes and types there are available, so you can get one that you prefer.
One of the many inexpensive procedures is for silk screen printing. There are many custom screen printing services in Fort Worth TX and other cities which they can do any design that you want without having to be through bulk orders. This is why small scale printing can be done easily, especially just by yourself.
This is done by first coating the screens in photo emulsion then seemingly cut an image out from it by using bright light. What you need are necessary materials to be able to do this, and with careful and attention to detail, this would be done well. Just make sure you have everything set up and ready.
The materials that you would need for this procedure includes a screen frame or you can also use an old frame that can tightly hold the screens. Next is you need a photo emulsion with sensitizer, and then a bulb which is two hundred fifty watts which can be bought for four dollars, and latex gloves. The room you use should be pitch black.
Additional stuff you need is of course a squeegee for splaying the paint all over the shirt through the screens, and then an article of clothing you want to be printed. The good thing about doing this on your own is personalization. This makes you free to do whatever you want with the design and other customizations you want.
To prepare the design of the screens, you need to first setup the frame and screens and make sure they are tightly placed. Then you add and splay over the photo emulsion which should be mixed in with the sensitizer. Use the squeegee to evenly spread it. Make sure that the covered area is twice the size of the design to leave room for it.
When that is done, you can then place the screen in a dark room. Make sure there is no leak in light and that it stays there for two hours or until it dries completely. Go inside the room after that without turning on the lights and place over the printed design from the transparent sheet. This is what does the cutting process. Use a masking tape so it is easier to take out later.
Let it stay there for fifteen minutes and then turn the lamp on and take a peek before peeling it out completely. The cut out should be faint, but if it is not enough, let it stay on longer for a few more minutes. Do not overexpose this or else the image would tend to bleed over the screen.
Clean the screens off with running water until the dried emulsion on the design or the cut out parts are completely gone. Let it dry and lay it over the shirt with the cardboard inside it. Apply the ink over it and spread it using a squeegee over different directions, making sure it is evenly spread. Carefully take it out and let it dry.
One of the many inexpensive procedures is for silk screen printing. There are many custom screen printing services in Fort Worth TX and other cities which they can do any design that you want without having to be through bulk orders. This is why small scale printing can be done easily, especially just by yourself.
This is done by first coating the screens in photo emulsion then seemingly cut an image out from it by using bright light. What you need are necessary materials to be able to do this, and with careful and attention to detail, this would be done well. Just make sure you have everything set up and ready.
The materials that you would need for this procedure includes a screen frame or you can also use an old frame that can tightly hold the screens. Next is you need a photo emulsion with sensitizer, and then a bulb which is two hundred fifty watts which can be bought for four dollars, and latex gloves. The room you use should be pitch black.
Additional stuff you need is of course a squeegee for splaying the paint all over the shirt through the screens, and then an article of clothing you want to be printed. The good thing about doing this on your own is personalization. This makes you free to do whatever you want with the design and other customizations you want.
To prepare the design of the screens, you need to first setup the frame and screens and make sure they are tightly placed. Then you add and splay over the photo emulsion which should be mixed in with the sensitizer. Use the squeegee to evenly spread it. Make sure that the covered area is twice the size of the design to leave room for it.
When that is done, you can then place the screen in a dark room. Make sure there is no leak in light and that it stays there for two hours or until it dries completely. Go inside the room after that without turning on the lights and place over the printed design from the transparent sheet. This is what does the cutting process. Use a masking tape so it is easier to take out later.
Let it stay there for fifteen minutes and then turn the lamp on and take a peek before peeling it out completely. The cut out should be faint, but if it is not enough, let it stay on longer for a few more minutes. Do not overexpose this or else the image would tend to bleed over the screen.
Clean the screens off with running water until the dried emulsion on the design or the cut out parts are completely gone. Let it dry and lay it over the shirt with the cardboard inside it. Apply the ink over it and spread it using a squeegee over different directions, making sure it is evenly spread. Carefully take it out and let it dry.
About the Author:
You can visit igniteimaging.com for more helpful information about Homemade Process From Custom Screen Printing Services.
No comments:
Post a Comment